IT
Showing 1–12 of 54 results
-
FixedFTD
The FTD are professional digital photocells with a range of up to 25 meters and IP65 protection rating. Powered by 12–24 V AC/DC. Thanks to configurable jumpers, it is possible to select the address (up to 4 devices without interference), adjust the transmission power (near/medium/far/max), and enable/disable the buzzer.
-
180FTX180
180 ° ADJUSTABLE outdoor photocells, very elegant.
Power supply: 12 – 24 Vac / dc
Absorption: 15mA(RX)/300uA(TX).
Operating temperature -20 ° + 80 °
Max range 20 mt. -
PhotocellsFTREFL03
Outdoor photocells 180 ° adjustable,
Model REFLEX with polarized reflection light.
Power supply: 12 – 24 VAC / DC
Max capacity 17 mt. -
FixedFTX40
Infrared photocells FTX40 – range up to 40 m, 12–24 V AC/DC power supply, compact design, and stable installation for safe automation.
-
Nylon RackCNYG6S
Nylon rack reinforced with an internal steel bar , tooth M4, with 6 facing up attachments.
Maximum gate capacity of 800 Kg. -
-
Traffic Light Control UnitsDC5SEM2LT
TIMED control unit, Automatically determined by the control unit in a cyclic manner:
for MANAGEMENT OF 5 TRAFFIC LIGHTS WITH 2 LIGHTS
24 Vac / Vdc traffic light management: SML2L24V models
230 Vac traffic lights management: SML2L230V models
Board power supply: 230Vac -
Traffic Light Control UnitsDC4SEM2LT
A control unit with TIMES, Automatically determined by the control unit in a cyclic manner
: for the MANAGEMENT OF 4 2-LIGHT TRAFFIC LIGHTS
24 Vac/Vdc traffic light management: SML2L24V models
Traffic Light Management at 230 Vac: Models SML2L230V
Board Power Supply: 230Vac -
WiFiDSWIFI2R
Wi-Fi RECEIVER to open the gate from a SMARTPHONE
With the DSS App (DomoSmartSystem), it allows you to open a gate of any brand, with a button on the smartphone.
Power supply: 12 – 24 Vac/dc -
WiFiDomoSmartSystem
The DomoSmartSystem application and the DSWIFI2R device are always connected to each other via the internet, in this way it can be operated at any time and from anywhere in the world.
From the app it is possible to configure, through a wizard, a portal that allows you to further automate the main functions of the DSWIFI2R, such as, for example, making it compatible with voice assistants, position detections, time detections, etc.
-
RFHERMES.R4MF
RF RECEIVER, UNIVERSAL MULTIFREQUENCY: 270-900 MHz
Channels / Outputs: 2 NO / NC, separately settable, Monostable, Bistable or Timed
Stores most transmitters with frequency between 270 MHz and 900 Mhz Fixed Codes and / or Rolling Code
Different Brands, different Codes and different Frequencies can be stored simultaneously on each channel
Power supply: 12 – 28 Vac / dc -
RFHERMES.R2MF
The receiver supports a frequency range between 270-900 MHz, and can handle 2 channels/outputs, which can be configured as NO/NC, monostable, bistable or timed. The receiver is able to memorize most of the transmitters with fixed codes and/or rolling codes and different brands, codes and frequencies can be memorized on each channel at the same time. The receiver is powered with 12-28 VAC/DC.
