LD212

Domotime LD212 two-channel magnetic loop detector is able to manage one or two magnetic loops and provide an output signal when a metal body of reasonable size (car, motorcycle, etc.) passes over the loops themselves.

It therefore also allows the control of devices such as traffic lights, gates, barriers, etc. 

The detector is equipped with two relays and can provide a 0.5 second output signal or a signal for the duration of the vehicle detection (time of presence).

The sensor can distinguish the direction of origin of the vehicles.

The detector is also adjustable both in frequency and in sensitivity.

The frequency setting allows you to install multiple detectors side by side without causing interference.

The sensor also has a “frequency filter” function that allows you to alter the frequency independently in the event that it encounters interference from other devices.

The sensitivity setting allows the sensor to be selective with respect to the size of the metal body detectable by the loop.

The detector has an “auto sensitivity increase” feature which automatically alters sensitivity under certain circumstances.

Use it with the Domotime magnetic loops LDC06 and LDC10 .

• Power supply: 24 V AC / DC
• Detector tuning range: 50 ÷ 1000 μH
• Number of coils that can be connected: 2
• Number of relays: 2
• Pulse relay: 0.5 seconds
• Presence relay: only in presence
• Relay range: 0.5 A / 230 V
• Operating temperature: – 40 ° C / + 70 ° C
• Dimensions: 78 x 80 x 41 mm
• Weight: 115 g

See data sheet