LD112

Domotime LD112 single-channel magnetic loop detector is able to manage a magnetic loop and provide an output signal when a metal body of reasonable size (car, motorcycle, etc.) passes over the loop itself.

It therefore also allows the control of devices such as traffic lights, gates, barriers, etc.

The detector is equipped with two relays:

• Relay A: When the loop detects a vehicle, the detector keeps Relay A switched as long as the vehicle is present on the loop itself;
• Relay B: When the loop detects a vehicle, the detector switches Relay B with a pulse even if the vehicle continues to be detected on the loop itself.

The detector is also adjustable both in frequency and in sensitivity.

The frequency setting allows you to install multiple detectors side by side without causing interference.

The sensor also has a “frequency filter” function that allows you to alter the frequency independently in the event that it encounters interference from other devices.

The sensitivity setting allows the sensor to be selective with respect to the size of the metal body detectable by the loop.

The detector has an “auto sensitivity increase” feature which automatically alters sensitivity under certain circumstances.

Use it with the Domotime magnetic loops LDC06 and LDC10.

• Power supply: 24 V AC / DC
• Detector tuning range: 50 ÷ 1000 μH
• Number of coils that can be connected: 1
• Number of relays: 2
• Pulse relay: 0.5 seconds
• Presence relay: only in presence
• Relay range: 0.5 A / 230 V
• Operating temperature: – 40 ° C / + 70 ° C
• Dimensions: 78 x 80 x 41 mm
• Weight: 115 g