Vehicle Detection

Vehicle detection is essential for automating entrances and managing traffic effectively.

We use inductive loops, installed in the ground, to accurately detect the presence of vehicles, and external vehicle sensors, ideal for areas where invasive interventions are not possible.

Two reliable technologies to ensure control, safety, and smooth access flow.

Discover the full range

Mass Detection

Mass Detection
LDC10

Spira preassembled for Loop Detector
Detection: with magnetic field
Perimeter of operation: 10m
Output cable: 15m
Match with any Loop Detector, in our catalog are: LD112, LD212, LD102, LD202, LD100, LD200
Mass Detection
LDC06

Spira preassembled for Loop Detector
Nummer: with magnetic field
Perimeter of operation: 6m
Output cable: 15m
Match with any Loop Detector, in our catalog are: LD112, LD212, LD102, LD202, LD100, LD200
Mass Detection
LD212

LOOP DETECTOR Vehicle detector
Operation: with DOUBLE-CHANNEL magnetic loop
IT CAN RECOGNIZE THE DIRECTION OF RUNNING OF THE VEHICLE
Connectable coils: 2
Operating temperature: -40°C +70°C
Power supply: 12-24 Vac/Vdc.
Mass Detection
LD210

LOOP DETECTOR Vehicle detector
Operation: with DOUBLE-CHANNEL magnetic loop
IT CAN RECOGNIZE THE DIRECTION OF RUNNING OF THE VEHICLE
Connectable coils: 2
Operating temperature: -40°C +70°C
Power supply: 230V AC.
Mass Detection
LD110

LOOP DETECTOR Vehicle detector
Operation: with SINGLE-CHANNEL magnetic loop
Connectable coils: 1
Operating temperature: -40°C +70°C
Power supply: 230V AC
Mass Detection
LD112

Loop Detector Vehicle Detector

Sensors

Sensors
LD302

PhotoLaser – Laser detector
Operation Direct reflection laser beam (without reflection mirror)
Ray of action Table, max: 8m
Operating temperature: -20 ° ÷ + 50 °
Degree of protection: IP55.
NASSorption: 60 mA
Power supply: 12 – 24 Vac / DC
Sensors
TXKT

Remote control for IDKTMI sensor programming.
Very comfortable accessory as it allows to set the various distance functions.
A remote control can be used for programming multiple sensors of the IDKTMI model.
The remote control is optional as the sensor can be programmed directly.
Technology: infrared
Power supply: 2 1.5V AAA batteries (inclusive)
Sensors
TXRB

Remote control for programming the IDRBMO sensor.
Very convenient accessory as it allows you to set the various functions remotely.
A remote control can be used for programming several sensors of the IDRBMO model.
The remote control is optional as the sensor can be programmed directly.
Operation: Infrared
Power supply: 2 x 1.5V AAA batteries (included)
Sensors
IDRBMO

Sensor for indextrous doors, serves to detect vehicles and / or people and control the opening.
The sensor detects the direction of the vehicle and recognizes difference between people or vehicles.
Maximum installation height (H): 7M
Protection: IP67
Operating temperature: -30 ° C ÷ + 60 ° C
Detection technology: Microwave
Power supply: 12-36 VDC / 12-28 VAC
Sensors
RDMO1024

Sensor for industrial doors, used to detect vehicles and persons and command opening.
Sensing: mono or bi-directional
Detects the direction of travel of the vehicle
Maximum installation height (H): 6M
Degree of protection: IP66
Operating temperature: -20 °C ÷ + 50 °C
Operation: planar microwave
Power supply: 12 – 24 V ac/dc.
Sensors
IDKTMI

Sensor for independent doors , serves to open (micronde) and / or do not implore (infrared) if there is an obstacle
detects the direction of travel of the vehicle and recognizes difference between people or vehicles
Maximum installation height (h): 6.5m
protection: IP65
Operating temperature: -20 ° C ÷ + 60 ° C
Double technology.
Power supply: 12 – 24 V AC / DC