Tag: DQ
-
antennaANT.MF
Antenna for gates, multi-frequency suitable for 433 – 868 MHz transmissions.
Helically calibrated, equipped with 4 meters of coaxial cable.
Compatible with all 433 MHz and 868 MHz receivers.
-
Aluminum traffic lights and vehicle indicatorsDC5SEM2LT
TIMED control unit, Automatically determined by the control unit in a cyclic manner:
for MANAGEMENT OF 5 TRAFFIC LIGHTS WITH 2 LIGHTS
24 Vac / Vdc traffic light management: SML2L24V models
230 Vac traffic lights management: SML2L230V models
Board power supply: 230Vac -
Aluminum traffic lights and vehicle indicatorsDC4SEM2LT
A control unit with TIMES, Automatically determined by the control unit in a cyclic manner
: for the MANAGEMENT OF 4 2-LIGHT TRAFFIC LIGHTS
24 Vac/Vdc traffic light management: SML2L24V models
Traffic Light Management at 230 Vac: Models SML2L230V
Board Power Supply: 230Vac -
Aluminum traffic lights and vehicle indicatorsDC3SEM2LT
Times, Automatically determined by the control unit in a cyclic manner: for the management of 3 traffic lights with 2 lights
24 VAC / VDC: SML2L24V models
230 Vac traffic lights: SML2L230V models
Power supply: 230Vac -
Access ControlHL.ACKCF
The wired, vandal-proof, backlit, touch-screen keypad is an elegant, reliable, and durable device with an IP66 protection rating. It can be used as a keypad, a biometric reader, or a 125 KHz card/tag reader. It can operate in standalone mode or via Wiegand connection with a remote decoding board. It can store up to 1000 different codes and is powered with 12/24 VDC
-
Adjustable photocellsFTLB180
Outdoor photocells adjustable 180 ° battery
power supply: 12 VDC / 24 VAC / DC
battery: AAA 1.5 V
Operating temperature -20 ° + 60 °
protection: IP54.
Dimensions: 123x37x37 mm
Max flow rate 15 mt. -
Control electronics for automationsPBI.UDS
The industrial outdoor pushbutton station is a control device designed for use in outdoor and industrial environments. It consists of three buttons: one for up, one for down, and one for emergency stop.
The up button allows you to start the ascent of the automation to which it is connected, the down button enables you to initiate the descent of the automation, and the emergency stop button is used to immediately interrupt any ongoing movement.
-
Control electronics for automationsPBI.ES
The industrial outdoor button is a control device designed for use in outdoor and industrial environments. It consists of an emergency stop button, which is used to immediately interrupt any ongoing movement.
-
Control electronics for automationsPBI.UDES
The industrial outdoor pushbutton station is a control device designed for use in outdoor and industrial environments. It consists of three buttons: one for up, one for down, and one for stop.
The up button allows you to start the ascent of the automation to which it is connected, the down button enables you to initiate the descent of the automation, and the stop button is used to immediately interrupt any ongoing movement.
-
Hermes MF receiverHERMES.R4MF
RF RECEIVER, UNIVERSAL MULTIFREQUENCY: 270-900 MHz
Channels / Outputs: 2 NO / NC, separately settable, Monostable, Bistable or Timed
Stores most transmitters with frequency between 270 MHz and 900 Mhz Fixed Codes and / or Rolling Code
Different Brands, different Codes and different Frequencies can be stored simultaneously on each channel
Power supply: 12 – 28 Vac / dc -
Hermes MF receiverHERMES.R2MF
The receiver supports a frequency range between 270-900 MHz, and can handle 2 channels/outputs, which can be configured as NO/NC, monostable, bistable or timed. The receiver is able to memorize most of the transmitters with fixed codes and/or rolling codes and different brands, codes and frequencies can be memorized on each channel at the same time. The receiver is powered with 12-28 VAC/DC.
-
433MHz RF ReceiverSUN.RX433
The receiver supports a frequency of 433 MHz, and can manage 2 channels/outputs, which can be configured as NO/NC, monostable or bistable. The receiver is capable of memorizing most transmitters with fixed and/or rolling codes and different brands and different codes can be memorized on each channel at the same time. The receiver is powered with 12-24 VAC/DC.
-
TransmittersMOON.MFRC
This transmitter uses multi-frequency duplication technology to copy the fixed and rolling codes of existing remote controls. The transmitter is able to copy fixed codes between 270 – 900 MHz and rolling codes between 270 – 900 MHz, it also has 6 buttons on which each one can put a different code, frequency and brand from the other buttons. The transmitter has a long battery life and is powered by a single CR2032 lithium battery. It is entirely produced in Italy.
-
Nylon rack with 6 special attachmentsCNYG68/2
-
-
Control equipment for shuttersDRSCBMF
Control unit for rolling shutters with 433 MHz receiver included.
Simple programming and range up to 1 kW.
Multi-frequency available. -
Control equipment for shutters
DRSCB433
Control unit for rolling shutters with 433 MHz receiver included.
Simple programming and range up to 1 kW.
Multi-frequency available -
Aluminum traffic lights and vehicle indicatorsSML1L24V
ALUMINUM traffic light with 1 LIGHT
Lens diameter: 120mm
Illumination: boards with 25 high brightness LED
Degree of protection: IP65
Operating temperature: -20 ° C + 60 ° C
Power supply: 12-24 Vac / Vdc.
Related products
-
Control equipment for shuttersDCRSGREF
Control unit for damper with electro brake which is unlocked in the absence of voltage with remote control
433 MHz plate with rolling code encoding, built-in antenna for a max of 25 storable codes.
Photocell input and / or mechanical coast or 8K2
Electrofreno unlock battery: 12V – 1,2Ah
Operating temperature: -10 ° C + 55 ° C
Power supply: 230 VAC Max power: 1350W -
-
Aluminum traffic lights and vehicle indicatorsLDC10
Spira preassembled for Loop Detector
Detection: with magnetic field
Perimeter of operation: 10m
Output cable: 15m
Match with any Loop Detector, in our catalog are: LD112, LD212, LD102, LD202, LD100, LD200 -
Anti-vandal buttonsHL.PBS
Activation button from recessed aluminum , square, very robust.You can use it for many functions such as commanding the activation of a gate, an automatic port or the boiler ignition.
Dimensions: 86 x 86 x 2.5 mm
Operating temperature: -10 ° C ÷ + 55 ° C
Conduct: COM – NC – NC
Max relay input: 3 A / 36 VDC
