LD200

Domotime da molti anni è leader nella fornitura di prodotti per l’automazione e la sicurezza.

Two-channel magnetic loop detector for vehicles

Domotime LD200 two-channel magnetic loop detector is able to manage one or two magnetic loops and provide an output signal when a metal body of reasonable size (car, motorcycle, etc.) passes over the loops themselves. It therefore also allows the control of devices such as traffic lights, gates, barriers, etc. The detector is equipped with two relays:
  • The pulse relay can provide an output signal (from 1 or 0.2 seconds) when the sensor detects a vehicle that engages or leaves the loop;
  • The presence relay can provide an output signal as long as the sensor detects a vehicle above the loop.
The detector is also adjustable both in frequency and in sensitivity. The frequency allows you to install several detectors side by side without causing interference. Sensitivity allows the sensor to detect metal masses of various sizes. Use it with the Domotime magnetic loops LDC06 and LDC10 .
  • Power supply: 200-260 Vac
  • Detector tuning range: 15 ÷ 1500 μH
  • Number of coils that can be connected: 2
  • Number of relays: 2
  • Pulse relay: 0.2 to 1 second
  • Presence relay: only in presence
  • Relay range: 0.5 A / 230 V
  • Operating temperature: -40 ° C / + 80 ° C
  • Dimensions: 80 x 79 x 40 mm
  • Weight: 110 g
Product sheet Press to access the technical sheet

You may also like…

  • Spira magnetica da 6 metri LDC06
    Traffic lights and accessories

    LDC06

    Spira preassembled for Loop Detector
    Nummer: with magnetic field
    Perimeter of operation: 6m
    Output cable: 15m
    N
    Match with any Loop Detector, in our catalog are: LD112, LD212, LD102, LD202, LD100, LD200